How to Refinish a Hardwood Floor

If you have a hardwood floor that has begun to fade or show signs of wear, you may be wondering how to refinish it. Before you begin the project, you should always perform a test on an inconspicuous area. This can be a closet or a high-traffic area. Prepare a 6-inch by 6-inch area with paper towels and a coin. If no residue appears, you should use screening instead of sanding. If you notice hardened dirt or scratches, you can scrape off these with a putty knife.

Then, you can choose between varnish and penetrating sealer. Varnishes range from matte to glossy. The glossier the finish, the better. But be careful to choose a glossy varnish as it will darken as the years go by. Penetrating sealers provide a natural look and are easy to spot repair. However, penetrating sealer finishes are not as durable. For these reasons, it is best to have a receipt before deciding which refinishing method to choose.

Before you begin refinishing a hardwood floor, you must remove any furniture and shoes and spray the surface with hardwood floor cleaner. Close the windows and doors before you start the job. Afterward, you need to sand the floor with 180-grit sandpaper. Choose your sandpaper based on the desired durability of the finished floor. Also, make sure you remove all debris and secure any loose floorboards before the sanding process.

The final step in refinishing hardwood floors is to apply a protective finish. Use a soft cloth and mineral spirits to remove dust before applying the finish. Make sure to allow plenty of time for the floor to dry. It may take up to 24 hours depending on the humidity in the room. You should also wear gloves and protective eyewear when working on the floor. If you are doing the work yourself, be sure to follow the instructions carefully.

Choosing the type of finish is critical to the health and appearance of your hardwood floor. Ask a flooring expert what kind is best for you. Oil-modified urethane is the most common finish used today. It contains ingredients that form a film, resulting in a moisture-resistant, durable surface. The only drawback to using oil-based products is the potential risk of toxic fumes. You may also want to consider the environmental impact of the finish on your home.

When refinishing hardwood floors, you should also consider the thickness of your floors. Typically, solid hardwood floors can be refinished four to five times before they need to be replaced. However, thin hardwood floors may require a professional’s expertise. To start the project, you should clear the room. Remove any rugs, furniture, or wood flooring that might be on the floor. If you are unsure about the thickness of your hardwood floors, you can use a putty knife.

Hardwood floor refinishing is a great way to bring the shine back to an old wooden floor. With the help of a skilled company, you can get your wood floor restored to its original luster. Wooden floors can also add a great deal to the value of your home. Refinishing can restore the floor’s original shine, giving it a fresh new appearance. When done properly, hardwood refinishing can add more than just beauty to your home.

A Brief Rundown of

6 Facts About Everyone Thinks Are True

Similar Posts